论文部分内容阅读
随着网络走入寻常百姓家,如何提高上网速度,节省上网的费用,广大网民迫切关心,这里介绍点滴经验,供网友们参考。 首先,让我们缩短登录时间、快速地连上INTERNET,以中文WIN98为例,在“我的电脑”窗口中打开“拨号网络”,选择您通过ISP所建立的连接,单击右键,选择“属性”按钮,再打开“服务器类型”选项卡,清除如下3个选项框:1.登录网络,该选项是系统采用WIN-DOWS的用户名、密码登录INTERNET,因此完全是不必要的,反而增加了一次连接与检测的时间;2.IIPX/SPX兼容协议,该协议是WINDOWS系统与Netware网络之间的通信协议,对于拨号上网的用户来说也是不必要的;3.NetEBUI协议,该协议适用于小型网络(比如局域网)上的通信协议,这也是多余的。通过以上几项的设置,您的电脑上网连接时间至少缩短了一半。 其次可优化一下电脑上的网络传输端口。右键单击“我的电脑”,选择“属性”,在“设备管理器”栏中选择“调制解调器”,点击“属性”,再选择“调制解调器”选项卡,选择115200bps的传输速率。“连接”中不选取“拨号之前等待拨号音”,“高级”中选取“使用流控制”中的“硬件”,不选取“使用差错控制”中的“请求连接”。“附加设置”中确保“s11=50”。鼠标应接在COM1上,解调器应接在COM2上,用
As the network into the homes of ordinary people, how to improve the speed of Internet access, save the cost of Internet access, Internet users are urgently concerned about the bit by bit experience here, for users reference. First of all, let’s shorten the login time, connect to INTERNET quickly, take Chinese WIN98 as an example, open “Dial-Up Networking” in “My Computer” window, select the connection you made through ISP, right- “Button, then open the” Server Type “tab, clear the following three boxes: 1. Login network, the option is the system using WIN-DOWS user name, password INTERNET, it is completely unnecessary, but increased A connection and detection time; 2.IIPX / SPX compatible protocol, the protocol is the communication protocol between the WINDOWS system and Netware network, dial-up Internet users is also unnecessary; 3.NetEBUI protocol, the agreement applies to It is superfluous to have a communication protocol on a small network such as a local area network. Through the above settings, your computer Internet connection time by at least half. Second, you can optimize the computer’s network transmission port. Right-click My Computer, select Properties, select Modems in the Device Manager, click Properties, select the Modems tab, and select a transfer rate of 115200bps. In Connection, select Do not dial for dial tone before dialing. In Advanced, select Hardware in Flow Control and do not select Request Connection in Error Handling. Make sure ”s11 = 50“ in ”Additional Settings". The mouse should be connected to COM1, the demodulator should be connected to COM2, use