论文部分内容阅读
热工测量和热平衡计算表明:糠醛渣绝热板的保温效果好于纸浆绝热板;现行生产中用Fx7.1模浇注的7.7吨锭,加20公斤柳毛石墨保温效果较差,柳毛石墨加入量增加到30公斤或加20公斤柳毛石墨后再覆盖2公斤膨胀蛭石保温效果大大改善,顶面热损失由27～38％可减少到7～8％;头部钢锭模蓄热量约占40～57％,板下肩部有较大的散热强度;解剖钢锭发现在致密金属层下有不同程度的二次缩孔存在;合理模型选择、强化头部保温以及二次缩孔对钢材质量的影响尚须进一步研究。
Thermal measurement and heat balance calculation show that the insulation effect of furfural slag insulation board is better than that of pulp insulation board. In the current production, 7.7 tons of ingot cast by Fx7.1 mold and 20 kg of willow graphite have poor thermal insulation effect, The amount of heat increased to 30 kg or 20 kg of willow graphite and then covered with 2 kg of expanded vermiculite thermal insulation greatly improved the top heat loss from 27 to 38% can be reduced to 7 to 8% 40 ~ 57%, under the slab shoulders have a greater heat dissipation strength; anatomical steel ingot found in the dense metal layer have different degrees of secondary shrinkage exists; reasonable model selection, strengthen the head insulation and secondary shrinkage of the steel quality The impact still needs further study.