论文部分内容阅读
1.安装备件安装等离子彩电时,需要说明书、二节1.5V干电池、BNC插头、遥控器、D型15针电缆、电源线、DVI电缆、AV线等备件,如图1所示(见下页)。2.安装工具安装等离子彩电需配备的工具有冲击钻、玻璃钻、钻头(金刚钻头和白金钻头);另外,还需活动扳手、卷尺、水平尺、螺钉旋具、美工刀、铅笔、小剪刀、尖嘴钳、斜口钳等工具,如图2所示。(1)安装环境等离子彩电应避免安装在高温、潮湿和阳光直射且有强磁场干扰的环境中。等离子彩电很多都不带防水保护,散热栅格内印制电路板会直接与外界空气
1. Installation of spare parts When installing plasma TV, it is necessary to provide instructions, two 1.5V batteries, BNC plug, remote control, D-type 15 pin cable, power cable, DVI cable, AV cable and other spare parts as shown in Figure 1 ). 2.Installation tools Tools for installation of plasma TV include impact drill, glass drill, drill bit (diamond drill bit and platinum drill bit); In addition, need to move wrench, tape measure, level ruler, screwdriver, utility knife, pencil, small scissors , Needle-nose pliers, diagonal pliers and other tools, shown in Figure 2. (1) Installation Environment Plasma TV should be avoided in the environment of high temperature, humidity and direct sunlight with strong magnetic field interference. Many plasma TVs do not have waterproof protection, printed circuit boards within the cooling grid will be directly with the outside air