论文部分内容阅读
笔者根据数年来制作树石盆景的实践认为,除常见的水旱盆景外,最能体现出树与石组合相配成景的构图方式,大致有以下几种,提供作为参考。 1.石旁树:指在石体的旁侧生长的树木。可使用单树,也可使用几棵树木组合成景。单树制作时,要求树桩主干有一定的粗度,且有适当的曲度变化,枝叶不能过于浓密。树应比石高,但不能悬殊过大。根盘要在石体的基部展露。石与树应保持好恰当的距离(照图1)。群树制作时,要求树木低于石体,让石体大部份露于群树之上,把群树制作成枝叶浓密的丛生灌木林状,分布在石体周围(墨图1)。不管使用单树或群树制作,树木与石体必须比例适中,相配和谐。
Based on the practice of making boulder bonsai for several years, the author thinks that the composition of tree and stone can best reflect the composition of tree and stone in addition to the common water and drought bonsai. There are roughly the following kinds, which are provided as reference. 1. Stone next to the tree: refers to the stone in the side of the growth of trees. Can use a single tree, you can also use a few trees into a King. Single-tree production, the stump trunk requires a certain degree of roughness, and the appropriate curvature changes, foliage can not be too dense. Trees should be taller than stone, but not too large. Root plate to be exposed at the base of the stone body. Stones and trees should be kept at the right distance (Figure 1). When making a group of trees, the trees are required to be below the stone body. Most of the stone bodies are exposed above the group trees, and the group trees are made into thick bushy forest shrubs distributed around the stone body (Ink Figure 1). No matter the use of single tree or group tree production, the proportion of trees and stone body must be moderate and harmonious.