论文部分内容阅读
一、引言本文介绍微型计算机控制陶瓷隧道窑烧成系统,运用在燃油(也包括燃气)的隧道窑上,能对窑内关键点的温度、压力按要求进行自动控制,使其满足工艺要求的给定参数,进一步发挥了隧道窑高效、节能的优势,同时也使陶瓷烧成从人工手动中得到解放。微型计算机对生产过程进行控制,其实现的途径一般有两种形式。其一,是用现有的通用微型计算机系统或单板计算机进行适当的改造,以适应控制对象和控制目的需要;其二,是用大规模集成电路组成具有专门功能的微型计算机系统。随着大规模集成电路的日益普及,随着人们对微型机基本概
I. INTRODUCTION This paper introduces the microcomputer controlled ceramic tunnel kiln firing system, which is applied to the tunnel kiln of fuel oil (also including gas) to control the temperature and pressure of the key points in the kiln automatically according to the requirements so as to meet the technical requirements Given parameters, to further play the tunnel kiln efficient, energy-saving advantages, but also to make ceramic firing from manual manual to be liberated. Microcomputer control of the production process, the way to achieve it generally has two forms. First, the existing general-purpose microcomputer system or single-board computer is properly adapted to meet the needs of the control object and the control purpose. Second, micro-computer systems with specialized functions are formed by using large-scale integrated circuits. With the increasing popularity of large scale integrated circuits, along with the basic concept of microcomputers