Design of BUMPER Power Supply of CSR

• 出 处: IMP & HIRFL Annual Report
• 发表日期: 2002年00期
• 关键词: magnet hough adopt German raise driver damaged regulator shunt finished

The Bumper power supply is important in CSR, and high peak current and fast pulse are required. The parameter is showed in Table 1. Current linear fall time is a difficult point, because the inductance load could produce high negative voltage. So we must select a high current, high voltage and high speed power module as Bumper power supply output power module.

The Bumper power supply is important in CSR, and high peak current and fast pulse are required. The parameter is showed in Table 1. Current linear fall time is a difficult point, because the inductance load could produce high negative voltage. So we must select a high current, high voltage and high speed power module as Bumper power supply output power module.