论文部分内容阅读
为了使钢尽快成材,以满足国家对钢材日益增长的需要。对于小型轧钢车间来说,如何使轧制工序自动化以减轻劳动强度、提高产量和劳动生产率就显得非常重要了。围盘化是小型轧钢车间实行自动化的主要途径之一,目前围盘己被广泛地使用着。围盘大致分为三个部份:出口引导装置;盘体;进口引导装置。围盘生产的正常化主要取决于这三个部份是否满足要求;否则,不能达到预期的效果。在实际生产中,出口装置是一个很重要的环节,特别是反围盘中的出口装置,往往由于它不正常而影响生产。为了使轧件扭转一定的角度,可采用两种办法:一是安装扭导管,达是目前最常用的办法;另一是使轧件
In order to make the steel as soon as possible to meet the growing steel needs of the country. For small rolling shops, how to automate the rolling process to reduce labor intensity, increase productivity and labor productivity is very important. Discarding is one of the main ways of automating a small rolling mill. Currently, disc brakes have been widely used. The enclosure is roughly divided into three parts: outlet guide device, tray body, import guide device. The normalization of plate production mainly depends on whether these three parts meet the requirements; otherwise, the expected results can not be achieved. In actual production, the export device is a very important part, especially in the anti-plate export device, often because it is not normal and affect the production. In order to reverse the rolling of a certain angle, can be used in two ways: First, install the torsion tube, up to now the most commonly used approach; the other is to make rolling