【摘 要】
：
The influence of heat treatments on the microstructures and mechanical properties of the selective laser melting manufactured AlSi10Mg alloy modified with Sc was systematically investigated.The results showed that the addition of Sc element introduced pri
【机 构】
：
Materials Science and Engineering College,Kunming University of Science and Technology,Kunming,65009
论文部分内容阅读
The influence of heat treatments on the microstructures and mechanical properties of the selective laser melting manufactured AlSi10Mg alloy modified with Sc was systematically investigated.The results showed that the addition of Sc element introduced primary Al3Sc,which increased the heterogeneous nucleation during the so-lidification of AlSi10Mg alloy,and then the ultrafine network eutectic structure was obtained,and hence the tensile strength was improved significantly (nearly 23 ％).During the heat treatment process,the network eutectic structure transformed from continuous to discontinuous,and the grain refinement was weakened with an increasing heating temperature,both of which affected the mechanical properties of the Sc modified AlSi10Mg alloy.The tensile strength decreased from 438 ± 10 MPa for the Sc-modified alloy to 208 ± 6 MPa,while the fracture strain significantly increased from 6 ± 0.2 ％ to 30.2 ± 1.2 ％ when the Sc-modified alloy was heat-treated at 325 ℃ for 12 h.It has been found that the desirable microstructure and mechanical properties of SLM Sc-modified AlSi10Mg alloy can be realized by controlling the heat treatment process parameters.
其他文献
The increasing demand for portable and flexible energy storage devices drives the development of flexible electrodes and electrolytes.The aim of this work is to fabricate the flexible free-standing polyaniline/poly (vinyl alcohol) (PANI/PVA) composite ele
To promote substantially the performances of red phosphorous (P) anode for lithium and sodium-ion batteries,a simple plasma assisted milling (P-milling) method was used to in-situ synthesize SeP2/C composite.The results showed that the amorphous SeP2/C co
The influence of alloying elements and heat treatment on the microstructure and mechanical behaviors of extruded Mg Gd Nd ternary alloys was investigated in this study.The grain sizes dramatically decreased after extrusion,and the particles which distribu
The manganese sulfide (MnS) has attracted more attention as anode material on energy storage and conversion field,owing to its high theoretical capacity (616 mA h g-1) and good electrochemical activity.However,low electronic conductivity and large volume
An experimental study together with numerical simulation was conducted to investigate the formation mecha-nisms and control methods for stray grains at melt-back of seed in this paper.The numerical simulation results showed that the convex solid/liquid (S
Combination of hot isostatic pressing (HIP) and rejuvenation heat treatment (RHT) technology was used to restore creep-damaged DZ125 directional solidified superalloy,and the influence of microstructure restoration on high temperature fatigue behavior of
CeO2-ZrO2 mixed oxides with controlled morphologies (i.e.,nanorod,nano-polyhedral and disordered shape)were synthesized through either hydrothermal or coprecipitation method,and the corresponding supported Pd/CeO2 ZrO2 catalysts were also prepared by conv
As a candidate material for hydrogen separation,Yb-doped SrCeO3 has attracted increasing attention in recent decades.In the present study,Yb-doped SrCe0.9Yb0.1O3-α ceramics were prepared by the dry pressing and sintering approach,with the microstructure e
The crosslinked gelatin/chitosan/poly(vinyl alcohol)/hydroxyapatite (GEL/CTS/PVA/HAp,GCPH) sponges were fabricated by a freeze-drying method to yield the reinforced composite sponges with proper features.The porosity value and pore size of the crosslinked