论文部分内容阅读
The main projects and development status of noise forecasting and controlling on working face in coa
【机 构】
：
Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment,Hunan University of S
【出 处】
：
煤炭学报（英文版）
【发表日期】
：
2010年2期
其他文献
A new biofilter technology was used to control the methane concentration in the coal mine. The results indicate that the biofilter achieves a steady methane removal capacity of 1 470mg/(L·h)after 30 days start-up. More than 90% of the methane can be remov
Using self-developed gas-seepage experimental installation, under the same effective stress conditions, coal permeability experiments on different adsorption charac-teristics of gases, different temperatures and different gas adsorption contents were per-
By analyzing the characteristics and the production mechanism of rock burst that goes with abnormal gas emission in deep coal seams, the essential method of elimi-nating abnormal gas emission by eliminating the occurrence of rock burst or depressing the m
The influence of MoS2 on tribology characteristic parameter of Ni60A/MoS2 composite lubricating coat
Control effect of fracture on hard coal cracking in a fully mechanized longwall top coal caving face
Through theoretical analysis,simulation test and practice,the law of a fracture\'s influence on hard top coal press cracking was studied.The study focused on the relation between fracture and coal strength,top coal caving ability and work face layout.Ba
According to fluid dynamics analysis during the fire, the criteria k-ε two-equation model for solving three-dimensional turbulence was determined, the pollutants generated in the fire disaster were set by adopting Mixture multiphase flow, and the SIMPLE a
Mine gas extraction in China is difficult due to the characteristics such as mi-cro-porosity, low-permeability and high adsorption of coal seams. The pulsed mechanism of a high-pressure pulsed water jet was studied through theoretical analysis, experiment
The integrated monitoring system for running parameters of key mining equipment based on condition m
Statistic constitutive equation of top-coal damage for fully mechanized coal face with sublevel cavi
Under the action of abutment pressure in front of fully mechanized coal face with sublevel caving (CFSC), top-coal over CFSC deformed. In the process of whole de-formation of top-coal, it changed from continuum elastic mass to non-continuum plastic mass c