制作手掷模型滑翔机

• 作 者: 杨红光
• 机 构: 临漳县坊表中学,
• 出 处: 农村青少年科学探究
• 发表日期: 2013年12期
• 关键词: 水平尾翼 垂直尾翼 废旧塑料 泡沫板 沉降速度 翼尖 爬升角 桐木 透明胶带 安装角

手掷模型滑翔机制作较简单,费用低廉,备受广大航模爱好者喜欢。手掷模型滑翔机由机身、机翼中段、机翼翼尖、机翼加强条、水平尾翼、垂直尾翼等组成。手掷模型滑翔机一方面要降低沉降速度,要求轻;另一方面为了利用惯性以保持一定速度,也要有一定的质量,所以机身重量(不得大于80克)要适度。机身用3毫米~5毫米的桐木或松木片制作,机翼可用3毫米厚的废旧塑料泡沫板(或2.5毫米厚的薄桐木片)削制。

Hand throw model glider making more simple, low cost, much like the majority of model lovers. Hand-throw model glider by the fuselage, mid-wing, wing wingtips, wing reinforcement, horizontal tail, vertical tail and other components. Hand throwing model glider on the one hand to reduce the settlement speed, light; the other hand, in order to use inertia to maintain a certain speed, but also have some quality, so the body weight (not more than 80 grams) to be moderate. The fuselage is made of paulownia or pine veneers of 3 mm to 5 mm. The wings can be cut from 3 mm thick waste plastic foam boards (or 2.5 mm thick Paulownia wood chips).