Response of Tomato on Calcareous Soils to Different Seedbed Phosphorus Application Rates

来源 :Pedosphere | 被引量 : 0次 | 上传用户:wongbo
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Field experiments were conducted with five rates (0, 75, 150, 225, and 450 kg P2O5 ha-1) of seedbed P fertilizer application to investigate the yield of tomato in response to fertilizer P rate on calcareous soils with widely different levels of Olsen P (13-142 mg kg-1) at 15 sites in some suburban counties of Beijing in 1999. Under the condition of no P fertilizer application, tomato yield generally increased with an increase in soil test P levels, and the agronomic level for soil testing P measured with Olsen method was 50 or 82 mg kg-1 soil to achieve 85% or 95% of maximum tomato yield, respectively. With regard to marketable yield, in the fields where Olsen-P levels were < 50 mg kg-1, noticeable responses to applied P were observed. On the basis of a linear plateau regression, the optimum seedbed P application rate in the P-insufficient fields was 125 kg P2O5 ha-1 or about 1.5-2 times the P removal from harvested tomato plants. In contrast, in fields with moderate (50 < Olsen P < 90 mg kg-1) or high (Olsen P > 90 mg kg-1) available P, there was no marked effect on tomato fruit yield. Field survey data indicated that in most fields with conventional P management, a P surplus typically occurred. Thus, once the soil test P level reached the optimum for crop yield, it was recommended that P fertilizer application be restricted or eliminated to minimize negative environmental effects. Field trial were conducted with five rates (0, 75, 150, 225, and 450 kg P2O5 ha-1) of seedbed P fertilizer application to investigate the yield of tomato in response to fertilizer P rate on calcareous soils with widely different levels of Olsen P (13-142 mg kg-1) at 15 sites in some suburban counties of Beijing in 1999. Under the condition of no P fertilizer application, tomato yield generally increased with an increase in soil test P levels, and the agronomic level for soil testing P measured with Olsen method was 50 or 82 mg kg -1 soil to achieve 85% or 95% of maximum tomato yield, respectively. With regard to marketable yield, in the fields where Olsen-P levels were <50 mg kg -1 On the basis of a linear plateau regression, the optimum seedbed P application rate in the P-insufficient fields was 125 kg P2O5 ha-1 or about 1.5-2 times the P removal from harvested tomato plants In contrast, in fields with moderate (50 90 mg kg -1) available P, there was no marked effect on tomato fruit yield. Once the soil test P level reached the optimum for crop yield, it was recommended that P fertilizer application be restricted or eliminated to minimize negative environmental effects.
其他文献
本文通过对实际任务中连续波干涉仪雷达数字终端机定位测量噪声数据的特性分析,找出了其随机误差超差的原因,根据机理分析设计了数字滤波器抑制干扰噪声,使之测量精度满足设
USB系统测速采用双程相干多普勒测速技术,由于电离层电子浓度随高度和大气状况时刻变化,具有不确定性,以及多普勒频率的提取存在测量误差,这会给目标径向速度的计算带来一些
本文针对试验任务中出现的gnss数据延迟导致弹道解算存在着偏差、曲线向后延时的问题,对所有的测量设备的测量数据进行分析,并分析数据延迟的原因,指出数据延迟对测控设备带
本文分析了影响航天测量船外测系统初轨精度的误差源,讨论了误差源对目标位置和速度影响,计算了测量船在不同布站几何条件和不同轨道特征情况下,误差源对初轨半长轴a的影响的
对航天器多普勒测速的一项误差进行了分析,详细推导了圆轨道和椭圆轨道时该误差的计算公式,计算了不同采样周期和轨道高度时的误差大小.分析指出,该项误差对高轨卫星影响较小
本文简述软件可靠性测试、航天飞控中心测控软件系统测试环境,讨论测控软件运行剖面,论述测控软件可靠性参数选择和建立可靠性估计模型的方法,阐述测控软件可靠性测试的层次
摘要目的探讨直接数字放射成像(DR)、计算机放射成像(CR)与屏片乳腺X线摄影(SFM)在大规模即时性队列研究中的性能比较。材料与方法这项研究是由多伦多大学 Abstract Objecti
本文提出了一种中温快速制备渗钛涂层的方法.这种方法将表面纳米微晶化和传统的粉末扩散渗镀相结合,在相对较低的温度(650-700 ℃)下振动处理180-300 min就能制备厚为10-20
在甲酸盐系中制备了厚度为50μm以上且外观良好的硬铬镀层,并考察热处理温度和镀层的硬度、耐磨性能、耐腐蚀性能的关系.实验结果表明:镀层的性能和热处理温度有很大的关系.
  2004年8月27日6:40 接到报告,某中学有几名军训学生及教官出现腹痛、腹泻等症状,疑似食物中毒。经流行病学调查,判定是一起由雪豆炖猪蹄引起的细菌性食物中毒。1 中毒经