论文部分内容阅读
本文介绍一些在使用时会遇到的故障现象和处理对策,这些都是用户自己能够处理的。一、主放大器1.左右声道扬声器均无声(1)处于静音状态,按下遥控器上的静音键(MUTING),取消静音。(2)耳机插头插在耳机插座上了,拔下耳机插头。2.某一个声道扬声器没有声音(1)扬声器的引线断了,重新连好。(2)立体声平衡旋钮置于一边了,置于中间位置。3.环绕声背面扬声器无声(1)背面扬声器的引线开路了,重新连接好。(2)没有设定成环绕声工作状态,重新设定。二、遥控装置不能遥控(1)电池用完了,更换电池。(2)遥控器距机器太远,或有障碍;或是角度不对,在可遥控范围内操作。(3)试图对录音中磁带进行放音的操作,要等到录音结束。(4)有关遥控线未连好,重新连好。三、调谐器
This article describes some of the symptoms encountered in the use of the phenomenon and deal with countermeasures, these are the users themselves can handle. First, the main amplifier 1 left and right channel speakers are silent (1) in a silent state, press the mute button on the remote control (MUTING), unmute. (2) The headphone plug is plugged into the headphone socket, unplug the headphone plug. 2. There is no sound for one channel speaker (1) The lead of the speaker is broken and reconnected. (2) Stereo balance knob set aside, placed in the middle position. 3. Surround Sound Back Speaker is silent (1) Rear speaker’s lead is open and reconnected. (2) Not set to surround sound work, reset. Second, the remote control can not remote control (1) the battery runs out, replace the battery. (2) The remote control is too far away from the machine, or there is an obstacle; or the angle is wrong, it can be operated in the remote controllable range. (3) Trying to play the tape in the recording, wait until the recording is over. (4) The remote control line is not good, reconnect. Third, the tuner