论文部分内容阅读
目前汽车、拖拉机大多采用摩擦式离合器,它们的常见故障是:打滑、分离不彻底、接合不平顺、发响等。1离合器打滑离合器必须可靠的传递发动机的最大扭矩,因此摩擦式离合器的摩擦力矩必须大于发动机最大扭矩,也就是说,当离合器完全接合时,离合器的从动部分必须与主动部分紧密结合,有足够的摩擦力,借以传递发动机最大扭矩,否则就会出现传递效率降低,严重时,发动机无法将动力传至传动系,这种故障称为离合器打滑。离合器打滑的表现为,当车辆起
Currently cars, tractors mostly friction clutch, their common faults are: skidding, separation is not complete, the joint is not smooth, sound and so on. Clutch slip clutch must be reliable transmission of the maximum engine torque, friction clutch friction torque must be greater than the maximum engine torque, that is, when the clutch is fully engaged, the clutch driven part must be closely integrated with the active part, there is enough Of the friction, in order to deliver the maximum engine torque, otherwise there will be reduced transmission efficiency, serious, the engine can not be transmitted to the power train, this fault is called clutch slip. Clutch slip performance, when the vehicle starts