振奋精神 解放思想 全面推进“两个转变” 促进我省工交经济持续、快速、健康发展——李蒙副省长在全省工交经济会上的讲话(摘要)

来源 :经营管理者 | 被引量 : 0次 | 上传用户:quixotic
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
省经委提出1996年工作重点抓好四个方面:一是继续深化企业改革,集中精力抓好现代企业制度试点;二是加大我省工业产品结构调整的实施力度,加快技术进步步伐;三是扩大对外开放,抓好工业发展的招商引资;四是加强企业管理,抓好企业扭亏解困工作。我认为还要加上一条,各市地州和各行业主管部门还要加强领导;各地经委要加强对工交生产运行的综合协调。 上述几个重点简而言之,就是抓改革、抓发展、抓生产、抓管理。但无论改革也好,发展也好,都要紧紧抓住经 Provincial Economic Commission put forward in 1996 the focus of work in four areas: First, continue to deepen the reform of enterprises, focus on a good grasp of the pilot of the modern enterprise system; second is to increase industrial restructuring in our province to implement the efforts to speed up the pace of technological progress; Third Expand opening up to the outside world, and do a good job in attracting investment for industrial development. Fourth, strengthen enterprise management and do a good job of turning losses into profits and losses. I think we should add one article. All the prefectures and prefectures and various departments in charge of industries should also strengthen their leadership. The economic commissions at all localities should step up their overall coordination of the production and operation of the industrial and commercial exchanges. In short, the above-mentioned several focuses on reform, development, production and management. However, no matter reform or development, we must grasp firmly
其他文献
为了提高Mo-Mgo金属陶瓷保护管的使用寿命,探讨其物理化学腐蚀过程,对使用后的保护管进行取样分析,并对该种金属陶瓷制成的坩埚进行铁、钢,渣等诸因素的腐蚀试验研究,结果表
立方氮化硼是继人造金刚石之后在超高压高温条件下合成的一种新型无机超硬材料。用这种材料制作的磨具和刀具,对“难加工”钢材——如高钒、高钴高速钢、镍基及铁基高温合金
本文在对马氏体、贝氏体复合组织常规机械性能测试的基础上,详细研究了马氏体、贝氏体复合组织中疲劳裂纹萌生和扩展的宏观规律和微观机理。根据这种分析,提出了利用马氏体、
坐标图中,为了避免坐标标尺数中出现过多的零,常将乘数用于坐标轴的标记中.例如:Years before present(×10~9)(Nature 331:613图2;1988)Age of surface(×10~9 yr)(Nature
An asynchronous high-speed pipelined 32×8-bit array multiplier based on latched differential cascode voltage switch with pass-gate (LDCVSPG) logic is presented
金刚石套料刀的试制成功改变了电子、光学工业部门历来采用的极为落后的散砂工艺套料半导仕、光学玻狱的加::八沙。经有关单位使用鉴定,金刚石套料刀用作必17’1毫米的硅片套
随着航空发动机的发展,对燃气涡轮叶片提出越来越高的要求,仅靠改进高温合金材料已不能满足。涡轮叶片在高温、高应力状态下工作,通常损坏形式为断裂或疲劳破坏,裂纹从晶间
一、引言近几年在喷涂领域中,对镍包铝粉末的研制和发展极为重视,在把它作为高温或其它方面应用的保护涂层材料,不断扩大它的应用范围,进行了大量的工作。镍包铝粉末是一种
利用渡口的钒钛生铁作原料,加入包头1#稀士硅铁合金作变质剂,进行蠕虫状石墨铸铁的研究。全部试验采用的配料比为:钒钛生铁50%,钒钛回炉铁50%。在酸性炉衬100 The use of fer
高合金钢的焊接主要是指不锈钢、耐酸钢、耐热钢、热强钢等各种特殊钢的焊接。在化学工业、航空工业、石油化工以及汽轮机、燃气轮机中均有广泛的应用。高合金钢按其织织来