论文部分内容阅读
本文报告一例在清洗压油机作业后发生急性三氯乙烯中毒。一、中毒经过 1977年2月12日上午,患者在从事三氯乙烯清洗压油机作业中,独自操作,因劳动强度过大被迫吸入了雾状三氯乙烯而引起了急性中毒,患者在室内解冻压油机后,将部件搬运到室外,放入到清洗槽内,该槽是一个1米×0.8米×1.1米容积大小的铁槽,向槽内加入8～10公斤三氯乙烯,复盖铁皮盖之后,再向槽内通入8～10公斤压入蒸气,以雾状三氯乙烯去除压油机部件油垢,清洗时间约1小时。当启盖后,平时是两人站在槽旁用铁勾提取,尔后用压缩风吹干在室内组装,但患者独自蹲在铁槽上方,用双铁勾提
This article reports an example of acute trichlorethylene poisoning after cleaning the compressor. First, the poisoning After the morning of February 12, 1977, the patient engaged in trichlorethylene cleaning press operation, operating alone, due to excessive labor intensity was forced into the mist of trichlorethylene and caused acute poisoning, patients in After indoor defrosting the compressor, the parts are transported to the outside and placed in a cleaning tank, which is a 1 meter by 0.8 meter by 1.1 meter capacity iron tank with 8-10 kg of trichlorethylene added to the tank, After covering the iron cover, then pass into the tank 8 ~ 10 kg into the steam, with trichlorethylene to remove oil pressure parts grease, cleaning time of about 1 hour. When the cover is opened, usually two people stood by the slot with iron hook extraction, and later with compressed air drying indoors assembly, but the patient squatted alone above the iron trough, with double iron hook