论文部分内容阅读
目前,农村较普遍使用的卧式铁辊碾米机,在一些地方,由于安装调整不当,致使动力消耗大,出米率低,碎米率高,经济效益差。现将正确的安装调整方法介绍如下。1.按照基础安装图,做好水泥或条石基础,以便机体牢固安装其上。基础与机座接触面和原动机安装的基础面要求水平。安装后米机牢固可靠,不抖动。2.碾米机中心线与原动机中心线的距离一般在1.5～1.8米,皮带松紧要适度。机身安装时要校正水平,辊筒轴心线与原动机轴心线必须平行,以免皮带打
At present, horizontal iron roller rice mills, which are commonly used in rural areas, have, in some places, large power consumption, low output rates, high broken rice rates and poor economic benefits due to improper installation and adjustment. Now the correct installation and adjustment methods are described below. 1. According to the basic installation drawings, cement or stone foundation, so that the body firmly installed on it. Base and base contact surface and prime mover installation of the basic level requirements. After the installation of rice machine solid and reliable, not jitter. 2. Milling machine centerline and the distance between the center line of the prime mover generally 1.5 ~ 1.8 meters, the belt tightness should be moderate. The fuselage to be calibrated when the level of installation, roller axis and the prime mover axis must be parallel to avoid belt hit