论文部分内容阅读
一九七五年我厂开始研究涡旋分离器应用于磨床上净化冷却液,并取得成功。经鉴定现已批量生产,受到广大用户好评。涡旋分离器是利用液体流动时常见的“旋涡”现象来达到分离杂质的目的。全套装置由高压水泵、分配器、玻璃排渣管、单向阀、水箱组成(见图)。冷却液经高压水泵升压,通过分配器成切线方向送入玻璃排渣管,使液流在管内形成旋涡,沿管壁急速而下旋转。随着圆锥体直径的减小,向心加速度急剧增大,磨屑、砂粒等杂质由于比重较大,在离心力的作
In 1975, our factory started to research the application of vortex separator on the grinding machine to purify the coolant and achieved success. Identified now mass production, praised by the majority of users. Vortex separator is the use of liquid flow commonly known as “vortex” phenomenon to achieve the purpose of separating impurities. A full set of devices from the high-pressure water pump, distributor, glass slag pipe, check valve, water tank composition (see photo). The coolant is pressurized by a high-pressure water pump and fed into the glass slag discharge pipe through the distributor in a tangential direction to cause the liquid flow to form a vortex in the pipe and rotate rapidly along the pipe wall. As the cone diameter decreases, the centripetal acceleration increases sharply, debris, sand and other impurities due to the larger proportion of centrifugal force in the