论文部分内容阅读
Nitrogen can easily contaminate molten steel during the steelmaking process and due to the low nitrogen capacity in slag, it is difficult to remove entrapped nitrogen from liquid steel. Degassing is often done to the steel at secondary steelmaking to lower the nitrogen content, but the control can often be kinetically limited by the steel grade and also the slag composition. Thus, a fundamental understanding of nitrogen dissolution into molten slag and metal including the rate of nitrogen dissolution can help in controlling nitrogen content in the final product.The kinetics of nitrogen dissolution in the molten calcium aluminate based slags and in molten steel with various element additions was investigated by measuring the 14N-15N isotope exchange reaction using a mass spectrometer at 1873 K.Results show that effect of elements on the rate constant of nitrogen dissolution such as Ni in Fe is relatively minimal similar to molybdenum. The surface rate constant of nitrogen dissolution in liquid Fe-10%Ni alloy was found to be 3.77×10-5 (mol/cm2·s·atm).The rate constant of nitrogen dissolution in the CaO-Al2O3-CaF2 slag was found to be wedge shaped, which decreased with increasing CaF2 to about 20 mol% followed by an increase through the rest of the CaF2 composition range. This was related to the effect of CaF2 on the structure of Al-O bonds for this slag.
Nitrogen can easily contaminate molten steel during the steelmaking process and due to the low nitrogen capacity in slag, it is difficult to remove entrapped nitrogen from liquid steel. Degassing is often done to the steel at secondary steelmaking to lower the nitrogen content, but the control can often be kinetically limited by the steel grade and also the slag composition. Thus, a fundamental understanding of nitrogen dissolution into molten slag and metal including the rate of nitrogen dissolution can help in controlling nitrogen content in the final product. kinetics of nitrogen dissolution in the molten calcium aluminate based slags and in molten steel with various elements additions was investigated by measuring the 14N-15N isotope exchange reaction using a mass spectrometer at 1873 K. Results show that effect of elements on the rate constant of nitrogen dissolution such as Ni in Fe is relatively minimal similar to molybdenum. The surface rate constant of nitrogen dissolution in The rate constant of nitrogen dissolution in the CaO-Al2O3-CaF2 slag was found to be wedge shaped, which decreased with increasing CaF2 to about 20 mol% followed by an increase through the rest of the CaF2 composition range. This was related to the effect of CaF2 on the structure of Al-O bonds for this slag.