Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of U

• 作 者: G.MAGUDEESWARAN Sreehari R.NAIR L.SUNDAR N.HARIKANNAN
• 机 构: Department of Mechanical Engineering,PSNA College of Engineering and Technology,Ador Welding Limited
• 出 处: Defence Technology
• 发表日期: 2014年03期
• 关键词: Duplex stainless steel ATIG welding Aspect ratio Taguchi design Ferrite number S

The activated TIG(ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention.The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency.The major influencing ATIG welding parameters,such as electrode gap,travel speed,current and voltage,that aid in controlling the aspect ratio of DSS joints,must be optimized to obtain desirable aspect ratio for DSS joints.Hence in this study,the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array(OA)experimental design and other statistical tools such as Analysis of Variance(ANOVA) and Pooled ANOVA techniques.The optimum process parameters are found to be 1 mm electrode gap,130 mm/min travel speed,140 A current and 12 V voltage.The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints.ence in this study, the above parameters of ATIG welding for aspect ratio of ASTM / UNS S32205 DSS welds are optimized by Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. Optimum process parameters are found to be 1 mm electrode gap, 130 mm / min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using t he optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.