论文部分内容阅读
以拍瓦激光产生泽秒(10-21s)脉冲
【机 构】
：
中国科学院上海光学精密机械研究所,上海201800
【出 处】
：
激光与光电子学进展
【发表日期】
：
2003年40期
其他文献
In-plane excitation of a topological nanophotonic corner state at telecom wavelengths in a cross-cou
In silicon photonics, the cavity mode is a fundamental mechanism to design integrated passive devices for on-chip optical information processing. Recently, the corner state in a second-order topological photonic crystal (PC) rendered a global method to ac
期刊
We use the selective area growth (SAG) technique to monolithically integrate InP-based 4-channel arrayed waveguide gratings (AWGs) with uni-traveling carrier photodiode arrays at the O-band. Two kinds of channel spacing demultiplexers of 20 nm and 800 GHz
采用窄间隙激光填丝焊接的方式对低合金高强钢D36进行对接，实现了良好的多层多道厚板焊接，焊后无裂纹、无气孔等缺陷。通过拉伸、弯曲试验，以及显微硬度测试、显微组织观察等分析手段对焊接接头的微观组织和力学性能进行了分析和表征。结果表明：热影响区粗晶区组织由大量板条状马氏体组成，细晶区组织由晶粒细小的珠光体和铁素体组成；焊缝中心组织为先共析铁素体 针状铁素体 粒状贝氏体。填丝焊道硬度从大到小依次为热影响区、焊缝中心、母材；钝边自熔打底焊接硬度从大到小依次为焊缝中心、热影响区、母材；焊接接头拉伸试样均断裂在母材位
针对传统光纤弯曲损耗位移传感器中位移与弯曲损耗的非线性关系,且高灵敏度和大量程不能兼得的问题,设计了一种U型缠绕式光纤弯曲损耗位移传感器,结构包括U型回绕和螺旋绕轴,两者合称为U型缠绕。理论证明被测位移量与光纤弯曲损耗之间的线性关系,推导出表达式,讨论了螺旋绕轴方式对光纤弯曲半径的影响和U型回绕方式对传感器精度的影响,并进行了一系列实验研究和性能测试。结果表明:传感器的测量范围为0~120mm,灵
We study a convex off-axis aspheric mirror which works as secondary mirror in space optical system. The parameters of the mirror are described. In order to test the surface error, the mirror is made up of fused silicon and is tested by the backside transm
A saturable absorber is commonly employed to generate an ultrashort laser with a mode-locking scheme. In an erbium-doped fiber laser system, the laser regimes of either 1530 or 1550 nm wavelength are procured based on the absorption profile of the erbium-
本文给出了光源频谱是洛仑兹分布的高斯脉冲,在单模光纤中传输时因一阶色散而展宽的近似理论.得到了在光纤中传输的脉冲光功率的系综平均值和输出脉冲宽度的均方根值的近似解析公式.数值分析的结果表明,所给出的公式与数值解的最大偏差小于5%.