论文部分内容阅读
By using membrane dispersion micro-extractor, Ce(Ⅲ) solvent extraction experiments were conducted. Cerium chloride solution with certain acidity was used as aqueous phase and 2-ethylhexyl phosphoric acid-2-ethylhexyl ester(EHEHPA) kerosene solution as organic phase. The effects of system physicochemical properties and operational conditions, such as initial EHEHPA concentration, initial aqueous acidity, total flow rate and continuous phase flow rate, etc., on the extraction efficiency and the overall volume mass transfer coefficient were evaluated. As the total flow rate increased from 20 to 160 m L/min, the overall volume mass transfer coefficient was enhanced from 0.1 to 0.54 s–1. Under the optimal conditions, the Ce(Ⅲ) extraction efficiency could reach 99.92% in 2.98 s. A mathematical model was set up to predict the overall volume mass transfer coefficient, and the calculation results agreed well with the experimental results, most relative error was within ±10%.
Cerium chloride solution with certain acidity was used as aqueous phase and 2-ethylhexyl phosphoric acid-2-ethylhexyl ester (EHEHPA) kerosene solution as organic phase. The effects of system physicochemical properties and operational conditions, such as initial EHEHPA concentration, initial aqueous acidity, total flow rate and continuous phase flow rate, etc., on the extraction efficiency and the overall volume mass transfer coefficient were evaluated. As the total flow rate increased from 20 to 160 m L / min, the overall volume mass transfer coefficient was enhanced from 0.1 to 0.54 s-1. Under the optimal conditions, the Ce (III) extraction efficiency could reach 99.92% in 2.98 s. A mathematical model was set up to predict the overall volume mass transfer coefficient, and the calculation results agreed well with the experimental results, most relative error was within ± 10%.