国家标准和煤炭行业标准计划项目建议、制定、修订和复审工作程序的规定

• 出 处: 煤矿机电
• 发表日期: 1992年01期
• 关键词: 行业标准 复审工作 计划项目 技术委员会 标准报批稿 标准送审稿 起草单位 监督处 专用设备 标准征求意见稿

能源部煤矿专用设备标准化技术委员会(以下简称“总会”),于1991年1月成立之后,下属十二个分技术委员会(以下简称“分会”)也相继成立。至此组建工作基本结束。为了尽快使工作踏上正轨,很需要逐步制定和完善有关工作制度,建立正常的工作程序,故而在首届主任委员和秘书长工作会议上共同商讨了这些问题。最后决定,今后的工作按以下的工作程序进行: 1 提出国家标准和煤炭行业标准(以下简称“标准”)计划项目建议的主要工作程序流程

Ministry of Energy Coal Mine Equipment Standardization Technical Committee (hereinafter referred to as the “General Assembly”) was established in January 1991, under the 12 sub-technical committee (hereinafter referred to as “chapter”) have also been established. At this point the basic conclusion of the work. In order to put the work on the right track as soon as possible, it is necessary to gradually formulate and improve the relevant work system and establish normal working procedures. Therefore, these issues were discussed together at the working meeting of the first chairman and secretary-general. The final decision, the future work according to the following working procedures: 1 proposed national standards and coal industry standards (hereinafter referred to as “standard”) the main work process of the proposed project process