【摘 要】
：
Effects of the matrix properties, particle size distribution and interfacial matrix failure on the elastoplastic deformation behavior in Al matrix composites re
【机 构】
：
School of Materials Science and Engineering,Southwest Aluminium Plant
论文部分内容阅读
Effects of the matrix properties, particle size distribution and interfacial matrix failure on the elastoplastic deformation behavior in Al matrix composites reinforced by SiC particles with an average size of 5 μm and volume fraction of 12% were quantitatively calculated by using the expanded effective assumption(EMA) model. The particle size distribution naturally brings about the variation of matrix properties and the interfacial matrix failure due to the presence of SiC particles. The theoretical results coincide well with those of the experiment. The current research indicates that the load transfer between matrix and reinforcements, grain refinement in matrix, and enhanced dislocation density originated from the thermal mismatch between SiC particles and Al matrix increase the flow stress of the composites, but the interfacial matrix failure is opposite. It also proves that the load transfer, grain refinement and dislocation strengthening are the main strengthening mechanisms, and the interfacial matrix failure and ductile fracture of matrix are the dominating fracture modes in the composites. The mechanical properties of the composites strongly depend on the metal matrix.
其他文献
Carbon soot containing fullerene was continuously produced in volume by pyrolyzing acetylene in thermal HF-Plasma. The characteristics of the carbon soot and C6
Copper nanopowders were successfully prepared by anodic arc discharging plasma method with home-made experimental apparatus. The effects of various processing p
In this article, a multiobjective optimization strategy for an industrial naphtha continuous catalytic reforming process that aims to obtain aromatic products i
Uniform droplet formation from capillary stream breakup provides promising opportunities for many applications such as solder balls manufacturing, circuit board
Oxygen deficient Nd0.67Sr0.33MnO3-δ ceramic samples were prepared using conventional ceramic technology. A colossal electroresistance (CER) effect was found in
In this study, nanosized TiO2 co-doped with Fe3+ and Nd3+ ions was synthesized via a sol-gel method. The metallic ion doped TiO2 was thoroughly characterized wi
3-mercaptopropyl trimethoxysilane (MPTS) was prepared on glass substrate so as to form a two-dimensional self-assembled monolayer (SAM), and the terminal -SH gr
Effects of the surfactant for improving the properties of MIM feedstock were investigated. Feedstocks were prepared by 17-4PH stainless steel(SS) powder and par
By testing the melt index (MI), tensile strength and breaking extension ratio, the thermal ageing rate of polyoxymethylene (POM) was analyzed and compared. The
The influence of Ga addition on the crystallization behavior and the magnetic properties of nanocomposite Nd2Fe14B-based/α-Fe magnets was investigated. It was