Monodisperse amino-modified nanosized zero-valent iron for selective and recyclable removal of TNT:

来源 :环境科学学报(英文版) | 被引量 : 0次 | 上传用户:caicai432111
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Nitroaromatic explosives are major pollutants produced during wars that cause serious environmental and health problems.The removal of a typical nitroaromatic explosive,2,4,6-trinitrotoluene (TNT),from aqueous solution,was conducted using a new recyclable magnetic nano-adsorbent (Fe@SiO2-NH2).This adsorbent was prepared by grafting amino groups onto Fe@SiO2 particles with a well-defined core-shell structure and demonstrated monodispersity in solution.The removal performance of the nano-adsorbent towards TNT was found to be 2.57 and 4.92 times higher than that towards two analogous explosives,2,4-dinitrotoluene (2,4-DNT) and 2-nitrotoluene (2-NT),respectively,under neutral conditions.The difference in the removal performance among the three compounds was further compared in terms of the effects of different conditions (pH value,ionic strength,humic acid concentration,adsorbent modification degree and dosage,etc.) and the electrostatic potential distributions of the three compounds.The most significant elevation is owing to modification of amino on Fe@SiO2 which made a 20.7% increase in adsorption efficiency of TNT.The experimental data were well fit by the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model,indicating multilayer adsorption on a heterogeneous surface.The experimental results and theoretical considerations show that the interactions between Fe@SiO2-NH2 NPs and TNT correspond to dipole-dipole and hydrophobic interactions.These interactions should be considered in the design of an adsorbent.Furthermore,the adaptability to aqueous environment and excellent regeneration capacity of Fe@SiO2-NH2 NPs makes these remediation materials promising for applications.
其他文献
针对生物力学测量的应用需求,考虑到电容型传感器温度特性好、功耗低等特点,研制了一种新型电容式三维力传感器。该传感器基于一种新颖的弹性体结构,以聚氨酯泡沫作为介质构成了3组电容,使得传感器能够同时感知3个维度的输入力分量并转化为3个通道的电容变化,利用ANSYS有限元分析确定了传感器的尺寸,使其各维度的量程达到±200 N,安全过载大于150%。设计了由电容采集模块和信号处理模块组成的测量系统,嵌入
为满足激光测速仪在米级距离的测速需要,设计了一种激光测速仪定焦系统。通过光束分析仪测量距离激光出射口不同位置处的光斑半径,利用函数拟合的方法得到激光束腰斑半径与腰
Wet purification technology for nonferrous metal smelting flue gas is important for mercury removal;however,this technology produces a large amounts of spent sc
为增强对新冠肺炎与普通肺炎的区分能力,协助医护人员对肺炎患者进行胸部CT检测,在人工智能图像分析的基础上提出了一种基于CT图像卷积神经网络处理新冠肺炎的检测方法。首先,搭建一个卷积神经网络模型,通过评估模型深度对检测结果的影响,以选择最佳的网络结构;其次,提出了一种禁忌遗传算法,用以获取网络模型中最优的超参数组合,增强模型的辨识能力;最后,通过最佳的卷积神经网络模型来辨别新冠肺炎与普通肺炎。实验结
室内场景的语义分割一直是深度学习语义分割领域的一个重要方向。室内语义分割主要存在的问题有语义类别多、很多物体类会有相互遮挡、某些类之间相似性较高等。针对这些问题,提出了一种用于室内场景语义分割的方法。该方法在Bi Se Net(bilateral segmentation network)的网络结构基础上,引入了一个空洞金字塔池化层和多尺度特征融合模块,将上下文路径中的浅层细节特征与通过空洞金字塔
在我国,少数民族在学好本民族语言文字的基础上进一步学习汉语,是发展少数民族文化教育事业的一项重要任务。在教学实践中,我深深地感到,抓好少数民族学生汉语早读课对提高少数民族学生的汉语水平有着很大的积极作用,抓好汉语早读至少有以下几个方面的重要意义。  一、汉语教师应认真抓早读课  这样不但对学生起督促和鼓励的作用,还能及时发现学生的发音、朗读、理解课文及语法概念上存在的问题,及时给予纠正、示范和指导
本文介绍一种通过智能控制实现全铝白车身自动弧焊系统解决方案。机器人焊接全铝白车身主要采用弧焊工艺,辅助点焊、铆接、胶结等工艺方法;采用挤压铝型材以及铝板冲压件,进
市面上常见的切割器均规定了固定的工作流量,当进入切割器的气流量不符合其标准工作流量时,就会带来捕集效率的偏差。通过搭建基于静态箱法的切割器捕集效率评价系统,对国产、进口的旋风式_(2.5)切割器的捕集效率进行了评价,研究了切割器标准工作流量及该值的70%、80%、120%、130%作为抽气流量时对_(2.5)切割器的捕集效率的影响。实验结果表明,_(2.5)切割器的Da50会随着进气流量的改变呈现
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
以ISO 4037中推荐的低空气比释动能率系列过滤X射线参考辐射为研究对象,设计合理的半值层测量实验,测量获取第一半值层的值;对建立的辐射质,利用碲锌镉能谱仪测量其过滤X射线