论文部分内容阅读
将牛头刨床平口虎钳的钳口铁改制成图中件5和件12所示。将数个工件11用螺母7紧固于分度棘轮轴10上。虎钳将分度棘轮14与工件一起夹紧,刨完一个槽后,松开虎钳,工件转一角度,再刨削另一个槽,即可简易、高效地加工棘轮之类沿圆周布齿或槽的零件,工件齿数可与分度棘轮齿数相同,也可为分度棘轮齿数的1/2,此时分度棘轮转过两齿刨一个齿。方销随方销座2沿钳口铁上的长槽调整移动,可适应调换不同直
The shaving plate of the shaper vise was remade into pieces 5 and 12 in the drawing. A plurality of workpieces 11 are fastened to the indexing ratchet shaft 10 with nuts 7. Vise will ratchet indexing ratchet 14 and the workpiece together, after planing a slot, release the vise, the workpiece turn angle, and then planing the other slot, you can simply and efficiently processing such as ratchet along the circumference of cloth Or groove parts, the number of teeth with the workpiece indexing ratchet teeth the same number, but also for the indexing ratchet teeth 1/2, indexing ratchet turned two teeth planing a tooth. Square pin with square pin 2 along the jaws on the iron slot to adjust the movement can be adapted to exchange different straight