论文部分内容阅读
1.皮带的保养水泵在运行时,要随时注意传动皮带是否过松或过紧。如果皮带过紧,轴承就会由于所受拉力过大而发热,加快轴承的损坏;反之,水泵达不到额定转速,降低工作效率,而且皮带还会跳动,使皮带容易损坏。如果皮带松紧合适,而皮带仍然打滑,就应在皮带上涂皮带蜡,同时要注意以下几点: (1) 不要使皮带沾上机油、柴油或汽油等油类,因为这些油都易腐蚀皮带。 (2) 要经常注意皮带的清洁,在清洗皮带时,要用温水洗刷,因为冷水洗不净,过热的水又易使皮带老化。 (3) 如果皮带表面发亮,应先清除皮带上的污垢,再涂上适量的皮带蜡。一般应尽可能避免使用皮带蜡。
1. Belt maintenance Pump in operation, we must always pay attention to whether the drive belt is too loose or too tight. If the belt is too tight, the bearing will be due to the tension is too large and heat, speed up the bearing damage; the other hand, the pump does not reach the rated speed, reduce work efficiency, and the belt will be beating, the belt easily damaged. If the belt is tight and the belt is still slipping, apply belt wax to the belt, taking note of the following points: (1) Do not allow the belt to become contaminated with oil such as oil, diesel or gasoline because these oils are susceptible to corrosion . (2) should always pay attention to the belt cleaning, when cleaning the belt, wash with warm water, because the cold water is not clean, overheated water and easy to make the belt aging. (3) If the belt surface shiny, should first remove the dirt on the belt, then apply the appropriate amount of belt wax. Should generally avoid the use of belt wax.