论文部分内容阅读
车辆在行驶途中需修换内外胎时,最使人伤脑筋的是用撬棍无法使轮胎与轮辋因生锈粘结在一起拆开,在此情况下,笔者采用的是一种用角铁块拆轮胎的办法,即用撬棍把要拆的轮胎的锁圈拆掉,挡圈取下,然后将轮胎翻过一个面,用角铁一面放在轮辋与轮胎接触处,另一面在外,将用鎯头敲击此面,使轮胎与轮辋带有振动及有缝隙时,然后取出角铁,移动角铁少许,用同样的方法,沿轮胎与轮辋边缘敲击角铁振动一周,使轮胎与轮辋不粘结在一起,再把轮胎立起,两手扶着轮胎,用力一脚蹬轮辋,轮胎与轮辋便脱落。 用此方法拆卸换胎,操作简便,省时、省力,本人收到了很好效果,望同行不妨试一试。
Vehicles on the road to be replaced when the inner and outer tires, the most brain-wrenching is the use of crowbars can not tire and rim due to rust bonded together in this case, I used is a kind of angle iron The method of demolition of the tire, that is to use the crowbar to remove the lock ring of the tire to be removed, retaining ring removed, and then turn the tire over a face, with angle iron on the rim and tire contact at the other side of the outside, When the tire and rims are vibrated and have gaps, the angle iron is removed and the angle iron is moved a little. In the same way, the angle iron is struck along the edge of the tire and rim for one week to make the tire Not sticking with the rim, then the tire stand up, both hands holding the tire, forced a pedal rim, the tire and the rim will fall off. With this method for removal of tires, easy to operate, time-saving, labor-saving, I received a good effect, hope counterparts may wish to give it a try.