论文部分内容阅读
要消除旧机床漏油,必須依靠群众想办法、出主意、不断总結經驗和积累資料。漏油既要影响車間場地清洁和环境卫生,又造成浪費。現将我厂在消除机床漏油方面的若干經驗,叙述如下,以供参考。一、机床一般漏油的原因及消除方法(1) 机床在运輸搬动过程中,油箱体或外露油管受到損伤,形成暗紋或破裂,以致漏油。消除方法可用环氧树脂胶粘剂,在暗紋或破裂处进行涂层和填补修复油箱体,将外露油管調換新管。(2) 原設計不合理,如油路无法循环或潤滑装置选擇不当等,均会导致漏油。消除方法:开通回油槽及回油孔,調整潤滑装置及进油量,使潤滑油导入油池。(3) 鑄造不良,鑄件本身有砂眼或暗縫。消除方
To eliminate the old machine tool oil spills, we must rely on the masses to think of ways and ideas and continuously sum up experiences and accumulate information. Oil spills should not only affect plant site cleanliness and sanitation but also result in waste. Now I plant in the elimination of oil spill a number of experience, described below, for reference. First, the general reasons for the machine oil leakage and elimination methods (1) machine moving in the transport process, the fuel tank body or exposed tubing damage, the formation of dark lines or cracks, resulting in oil spills. Elimination Methods Epoxy adhesives can be used to coat and fill the repair tank at obscured or ruptured locations to replace exposed tubing with new tubing. (2) The original design is not reasonable, such as oil circulation can not be recycled or improper lubrication device selection, etc., can lead to oil spills. Elimination method: Opened back to the tank and back to the oil hole, adjust the lubricating device and the amount of oil into the oil pool. (3) poor casting, casting itself has trachoma or dark seam. Eliminate side