论文部分内容阅读
弯曲测线资料处理程序,简称“S”程序,是为处理弯曲测线观测的野外资料而编制的.整个程序包括弯线处理要求的一些子块以及常规处理要求的一些子块.程序适用于150机,用的是150机器指令,除主机外,还使用了光电、觉行、A/D输入机、剖面显示仪等外围设备.现有程序处理100张野外带的一条弯线剖面大约需要用2—3小时.这分报告主要说明程序结构的设计思想和方法实现的数学模型,而没有涉及具体的机器指令.另外,报告还从处理的两条冲面的实例出发,对观测系统、地层倾角、速度等参数对于弯曲测线地质效果的影响进行了一些初步探讨,计算了一些临界数据;企图能给野外施工设计和处理参数的选取提供一些依据.
Curved line data processing program, referred to as “S” program, is prepared for the processing of the field data of curved line observation.The whole program includes some sub-blocks required by the curve processing and some sub-blocks required by the conventional processing. 150 machines, using 150 machine instructions, in addition to the host, but also the use of photoelectric, perception, A / D input machine, profile display and other peripheral devices. 2-3 hours .This report mainly describes the programming structure of the design ideas and methods to achieve the mathematical model, but did not involve specific machine instructions.In addition, the report also processed from the two examples of the red surface, the observation system, The influence of formation dip, velocity and other parameters on the geologic effect of bending line is discussed. Some critical data are calculated. It is hoped that some suggestions can be provided for the design of the field construction and the selection of processing parameters.