论文部分内容阅读
美国福特汽车公司在4.95升排量的V—8友动机基拙上,又设计了一种5.75升排量的V—8发动机,有两种型号:2V和4V。其差别在于压缩比、配气相位、汽化器与进气歧管。其性能数据见表1。两种型号所用的不同铸件,能在同一机床的同一工序进行加工。发动机的性能曲线见图1,纵、横剖面见图2和3。该友动机的特点是:正时链输室与曲轴箱成一整休,盖板是一令形状简单的冲压件。冷却系出水通道铸在气缸体上,而不在进气歧管
Ford Motor Company in the 4.95-liter displacement of the V-8 drive base, also designed a 5.75 liter displacement V-8 engine, there are two models: 2V and 4V. The difference lies in the compression ratio, gas phase, carburetor and intake manifold. The performance data in Table 1. Different castings for both models can be machined in the same process on the same machine. Engine performance curve shown in Figure 1, vertical and horizontal cross-section shown in Figure 2 and 3. The friend motivation is characterized by: timing chain chamber and crankcase into a whole break, the cover is a simple shape stamping parts. The cooling system water outlet is cast on the cylinder block, not on the intake manifold