论文部分内容阅读
为适应马岭高含盐油藏聚合物驱油需要，建立了以１０％水解度和３０％浓度的水溶胶聚丙烯酰胺为配液原料的聚合物配注站，部分克服了国产干粉聚合物分子量偏低的缺点。流体流变学计算结果和矿场配注实践表明，本配注站流程设计合理，所配聚合物溶液的主要技术指标符合聚合物驱替地质方案要求。在新岭２６６单井试注中，已累计配注６００～１０００ｍｇ／Ｌ聚合物驱油剂溶液１８３０８ｍ３，注入压力由９ＭＰａ上升到１４．５ＭＰａ，井组综合含水率上升趋势已得到控制，日产油量开始回升，已初步显示出聚合物驱油效果
In order to meet the need of polymer flooding in the high-salt reservoirs of Maling, a polymer injection station with 10% degree of hydrolysis and 30% concentration of water-soluble polyacrylamide as the dosing material was established to partially overcome the problems of domestic dry polymer The disadvantage of low molecular weight. Fluid rheology calculation results and mine note injection practice shows that the injection station flow design is reasonable, with the main technical indicators of polymer solution in line with the polymer flooding geological program requirements. In Xinling 266 single well test injection, the cumulative injection of 600 ~ 1000mg / L polymer displacing agent solution 18308m3, injection pressure increased from 9MPa to 14.5MPa, well group integrated moisture content rising trend has been controlled, Nissan Volume began to rise, has initially shown the polymer flooding effect