论文部分内容阅读
最近,午阳钢铁公司4200毫米特厚板轧钢厂投产.一机部第二重型机器厂采用西德、日本等国先进技术,为该厂提供了一套以弧线摆式双边剪为纵剪,2°30′倾向侧刀剪为横剪的新型剪切线.一台固定,一台活动弧线摆式剪相对配置,进行双边剪切,缩短剪切线厂房长度一半,节省了两台碎边剪设备的投资,2°30′倾角侧刀剪的横剪能剪出平直的废边进入碎边剪进行碎断.目前,国内中厚板轧钢厂的剪切线,皆为左右错开布置的两台侧刀式纵切剪和一台侧刀式横切剪.大剪倾角为5°40′,有的还各自带有一台碎边
Recently, the 4200 mm thick heavy plate mill of the Wuyang Iron and Steel Company was put into operation, and the second heavy machinery factory of a machine department adopted the advanced technologies from West Germany and Japan to provide the factory with a pair of arc-shear bilateral scissors , 2 ° 30 ’tends to the side of the new shearing shear line shear.A stationary, a movable arc swing shear relative configuration, bilateral shear, cut the length of the plant cut in half, saving two Broken edge scissors equipment investment, 2 ° 30 ’dip angle scissors side of the shear can cut out the straight edge of the waste into the broken edge cut broken.Currently, the domestic steel rolling mill cutting lines are all around Two side-slit slitting shears and a side-knife crosscutting shears offset by 5 ° 40 ’, with some also having their own side