离心式气水分离器

• 机 构: 鸡西矿务局设计处,小恒山矿洗煤厂
• 出 处: 选煤技术
• 发表日期: 1978年01期
• 关键词: 气水分离器 离心式 过滤机 占地面积 体积 重力 尺寸 中心管 真空泵 管路

传统的气水分离器是利用重力作用的原理而工作的,体积较大;改革后的离心式气水分离器,主要利用离心力加速气与水的分离,体积很小,约为传统的气水分离器的四十分之一(两者的尺寸和结构比较见图1),这样,所用的管路较短,只要布置在过滤机的后面即可(见图2),而且离心式气水分离器占地面积极小。从图1可见,离心式气水分离器,除

The traditional gas-water separator is the use of the principle of gravity and work, larger; the reform of centrifugal gas-water separator, the main centrifugal force to accelerate the separation of gas and water, small size, about the traditional gas and water One-fourth of the separator (both dimensions and structure shown in Figure 1), so that the use of the pipeline is shorter, as long as the layout can be arranged behind the filter (see Figure 2), and centrifugal gas and water Separator footprint is minimal. Can be seen from Figure 1, centrifugal gas-water separator, except