论文部分内容阅读
“增光水磨石”是在原普通水磨石表面上采用有机硅玻璃树脂、改性丙稀酸脂和树脂添加剂、硅烷偶联剂、湿气固化剂和高分子微晶腊、超细二氧化硅等复合改性的渗透性、溶剂型“增光剂”处理技术,在原普通水磨石层面上喷涂“增光剂”,使其能充分渗透石材表面1～3毫米,将水磨石表面的毛细孔和细小裂缝,微小凹坑填补增强,提高石材硬度和密度,经自然干燥8～12小时,然后采用机械传统抛光方法,进行水磨石的表面粗磨、细磨与毛毡抛光,使其表面光泽度由原来的40光泽单位提高到80光泽单位,并能抗油污、墨污、酱污、耐酸、耐碱、抗水压等,表面硬
“Gradient terrazzo” is a combination of organosilicon glass resin, modified acrylic acid ester and resin additives, silane coupling agent, moisture curing agent, polymer microcrystalline wax and ultra-fine silicon dioxide on the surface of the original ordinary terrazzo. The permeation and solvent-based “gloss enhancer” treatment technology sprays the “gloss improver” on the original ordinary terrazzo layer, allowing it to fully penetrate the surface of the stone by 1 to 3 mm, which will cause capillary pores and fine cracks on the surface of the terrazzo, tiny pits. Filling enhancement, improving stone hardness and density, natural drying for 8 to 12 hours, and then using the traditional mechanical polishing method, the terrazzo surface rough grinding, fine grinding and felt polishing, so that the surface gloss increased from the original 40 gloss units to 80 gloss units, and resistant to oil, ink, sauce, acid, alkali, water pressure resistance, hard surface