论文部分内容阅读
在机器制造中,广泛地应用着带有圆锥形的零件。在加工这些零件的时候,正确测量圆锥角度,对保证产品质量是很重要的。圆锥有内圆锥和外圆锥两种,它们的测量方法,要根据工件的精度及工厂现有条件来决定。这里准备谈一谈圆锥的一般测量方法。外圆锥的测量方法用样板测量精度要求不高的工件,或者是粗加工的工件,可以用图1A、B的样板来测量。测量时,将样板卡在工件上,从透过的光线来制定圆锥角度是否合适。样板上的两条刻线
In machine construction, conical parts are widely used. In the processing of these parts, the correct measurement of the cone angle, to ensure product quality is very important. There are two kinds of conical and outer conical cones, their measurement methods, according to the accuracy of the workpiece and the existing factory conditions to decide. Here to talk about the general method of measuring cones. The method of measuring the outer cone using the sample less accurate measurement of the workpiece, or rough machining of the workpiece, you can use Figure 1A, B to measure the template. When measuring, the sample card stuck on the workpiece, from the light through the cone to determine the appropriate angle. Two scribbles on the template