论文部分内容阅读
中国建筑二局三公司施工的唐山机车车辆厂高包车间是由网架结构厂房、单层钢筋混凝土排架结构厂房、砖混结构附属建筑所组成的一个综合性工业建筑。建筑面积共8997米~2,其中主厂房网架结构为8460米~2,为正交正放抽空四角锥网架,网格尺寸为2571×2571毫米,网架高度为1800毫米,纵横柱距均为18×18米。网架中间柱子为现浇正八角形钢筋混凝土柱,四周安装钢筋混凝土预制柱。屋面有三角形天窗,配玻璃钢采光罩,二毡三油一砂屋面防水,四周为天沟板,钢筋混凝土墙板围护。
The high-rise workshop of Tangshan Locomotive & Rolling Stock Works, which was built by the China Construction Second Bureau and the third company, is a comprehensive industrial building consisting of a grid structure factory building, a single-storey reinforced concrete structure and a brick-concrete structure auxiliary building. The total construction area is 8,997 meters~2, including the main building network structure is 8,460 meters~2, which is an orthogonal and positively-vented pumping quadrangular pyramid grid with a grid size of 2571*2571 mm, a grid height of 1800 mm, and vertical and horizontal column spacing. Both are 18 x 18 meters. The middle column of the grid is a cast-in-place octagonal reinforced concrete column with reinforced concrete precast columns installed around it. There are triangular skylights on the roof, equipped with glass and steel shades, two felts and three oils and one sand roof, and surrounded by gutter boards and reinforced concrete wall panels.