论文部分内容阅读
一、结构原理我厂自制的凸轮磨床是结合我厂生产实际制造的一台简易磨床。其结构原理如下:磨头是由马达通过皮带轮带动,转速为3500转/分。磨头两端轴承是三片短轴瓦油膜轴瓦,整个油箱注满机油,油池的油液可以循环,经四小时试验油液温升不超过18℃。工作台的移动是由手轮通过齿条带动。工作台的前后移动是由手轮通过丝杆带动,手轮格值0.01/格。靠模装置放在工作台的左端,靠模在两个固定滑板里运动。靠模的转动是由马达通
First, the structural principle Our factory-made cam grinder is a simple grinding machine combined with the actual production of our factory. Its structural principle is as follows: Grinding head is driven by the pulley through the pulley, the rotational speed is 3500 rev / min. The two ends of the grinding head bearings are three short-bearing film bearing pads, the entire tank filled with oil, oil tank of oil can be recycled, after four hours of test oil temperature does not exceed 18 ℃. Workbench movement is driven by the hand wheel through the rack. Table before and after the move is driven by the hand screw through the screw, hand wheel grid value of 0.01 / grid. By the device on the left end of the table, by two fixed mold in the slide movement. Rotation by the mold by the motor