论文部分内容阅读
Three-dimensional geodetic deformation surveying for Naner area in Daqing oilfield
【出 处】
：
Transactions of Nonferrous Metals Society of China
【发表日期】
：
2005年S1期
其他文献
精梳针织用纱要求条干和强力均匀,结杂少,纱疵少,因此,生产中必须做到工艺精细、管理严格.自1997年来,我公司生产CJ 14.5 tex针织用纱产品,产量逐年增加,质量保持稳定,深受用
Mechanical properties of Cf／Si-O-C composites prepared by hot-pressing assisted pyrolysis of polysil
Silicon oxycarbide composites reinforced by three-dimensional braided carbon fiber (3D-B Cf/Si-O-C)were fabricated via precursor infiltration and pyrolysis of p
<正>Mg-6Al-4RE-0.4Mn (mass fraction, %, RE=Ce rich mischmetal) alloy was prepared by steel mould casting technique. Solid solution and artificial aging (T6) wer
采用汉密尔顿转移指数的方法分析了不同比例的染色涤纶短纤维与棉纤维混纺纱径向纤维的分布规律,指出:涤棉色纺纱中涤纶纤维与棉纤维的混纺比不同,纱的结构将发生变化,纤维内
<正>The annealed microstructures of the rolled AZ31 alloy sheets were examined by using light optical microscopy. The mechanical properties were measured by ten
Grain refinement and mechanical properties improvement of casting A357 alloy by high pressure differ
0 引言 国产1511M型、1515型及GA系列自动换梭织机，原边剪系一种传统型最简单的连续空切剪锤式击断纬尾的边剪器，织造运行剪锤无效空切率达98%之多，故可能及时击断自动换出
WRC965型胶辊是低硬度高弹性不处理胶辊,无锡纺织机械试验中心于1995年起开始使用,经长期纺纱实践证明该胶辊性能良好,纺纱质量稳定.下面对WRC965型不处理胶辊的工艺性能及纺