论文部分内容阅读
目前,飞模常用于框架结构及内浇外砌(挂)剪力墙结构的现浇无梁楼盖体系(即大开口的结构)施工中,在全现浇剪力墙结构(即内外墙均为现浇的封闭结构)施工中,使用还不多。我们在煤炭科学院地勘分院高层住宅楼板施工中采用组合式飞模,取得了较好的效果。本工程建筑面积13200m~2,分为两段,A段标准层18层,局部21层;B 段标准层16层。A 段高度53.14m,局部高度63.06m;B 段高
At present, flying dies are often used in cast-in-place beamless floor systems (ie large-opening structures) for frame structures and cast-in-place external shearing (shallow) shear wall structures, in full-in-place shear wall structures (ie internal and external walls). Both are cast-in-place closed structures. There are not many use in construction. We have adopted a modular fly mode in the construction of high-rise residential floors in the Institute of Geological Prospecting, Coal Science and Technology, and achieved good results. The project has a building area of 13,200 m2 and is divided into two sections: 18 sections of the standard section of Section A and 21 sections of the section; and 16 sections of the section of the standard section of Section B. Section A height 53.14m, local height 63.06m; B section high