论文部分内容阅读
早在17世纪,缠绕技术已用来加强炮管。到19世纪,钢丝缠绕技术曾用于制造枪管;此后不断用于一些预应力工具和高压容器等。钢丝缠绕技术用于液压机是在20世30年代,有个叫柏拉顿的,设计制造了一台13200吨液压机,其机架的立柱和上下两端梁用钢丝缠绕,其机架内空间高度为0.8米,开档宽0.92米,前后进深0.6米。在当时,这样等级的压力机是很突出的;既使在现在,这也是一台吨位不算小的液压机。1950年
As far back as the 17th century, winding techniques have been used to strengthen the barrel. By the 19th century, wire winding technology was used to manufacture barrels; thereafter, it was continually used in prestressed tools and high pressure vessels. Wire winding technology for the hydraulic machine is in the twentieth Century 30, there is calledBratton, design and manufacture of a 13200 tons of hydraulic machine, the rack column and upper and lower ends of the beam with steel wire winding, the height of the space within the rack 0.8 meters, open file width of 0.92 meters, 0.6 meters into the depth before and after. At that time, such a level of press is very prominent; even now, this is a tonnage is not small hydraulic machine. 1950