【摘 要】
：
Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900 ℃ in air. Scanning electron microsco
【机 构】
：
Materials Research Center,College of Materials Science and Engineering
论文部分内容阅读
Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900 ℃ in air. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution electron microscopy (HREM) were used to examine the morphology and microstructure of the oxide film. It was found that ceria coating greatly improved the oxidation resistance of Cr both in isothermal and cyclic oxidizing experiments. Acoustic emission (AE) technique was used in situ to monitor the cracking and spalling of oxide film, and AE signals were analyzed in time-domain and number-domain according to related oxide fracture model. Laser Raman spectrometer was also used to study the stress of oxide film formed on Cr with and without ceria. The improvement in oxidation resistance of chromium is believed mainly due to that ceria greatly reduced the growth speed and grain size of Cr2O3. This fine-grained Cr2O3 oxide film might have better high temperature plasticity and could relieve parts of the compressive stress by means of creeping and maintained ridge character and relatively lower level of internal stress. Meanwhile, ceria application reduced the size and number of interfacial defects, remarkably enhanced the adhesive property of Cr2O3 oxide scale formed on Cr substrate.
其他文献
The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallogr
The effects of an external DC (direct current) electric field on recrystallization texture evolution in the cold-rolled aluminum sheets with 99.99% purity were
幼羔胚胎体外生产技术（JIVET）是全球草食类动物繁殖技术中最先进的生物工程技术。国内外对幼羔经激素诱导后生产胚胎已作了许多研究,并取得一定的成果,本文就其研究进展作一综
Effects of milling and crystallization conditions on microstructure, such as amorphous phase and nanocrystalline phase, were investigated by X-ray diffractometr
A novel novolac curing agent containing both naphthalene and dicyclopentadiene (DCPD) moieties was prepared to produce a highly heat-resistant cured polymer net
The corrosion behavior of Cu-Cr alloy in 3.5% NaCl + NH3 solution had been studied, and the influences of the concentration of NH3 on corrosion resistance discu
Uniform crystalline TiO2 thin films were coated on silica glass fibers by liquid phase deposition from aqueous solution of ammonium hexafluorotitanate at low te
The effects of different substrates on the structure and hydrogen evolution from a-Si:H thin films deposited by plasma enhanced chemical vapour deposition were
A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) su
By using the spark plasma sintering process, Ti2AlC/TiAl composite with the addition of Niobium (Nb) was prepared in-situ and the microstructure of Ti2AlC/TiAl