不同挤压温度对汽车车身板件用AZ31镁合金的组织与力学性能的影响

来源 :热加工工艺 | 被引量 : 0次 | 上传用户:tp137907226
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
主要研究了不同挤压温度下AZ31镁合金的微观组织和力学性能。结果表明:AZ31镁合金挤压试样会发生动态再结晶过程,且随着挤压温度升高晶粒的尺寸会增大;随着挤压温度的升高,试样的屈服强度和抗拉强度都会降低,伸长率会增加;在室温拉伸试验时试样发生韧性断裂。 The microstructure and mechanical properties of AZ31 magnesium alloy at different extrusion temperatures were studied. The results show that the dynamic recrystallization of the AZ31 magnesium alloy samples will occur during the dynamic recrystallization, and the size of the crystal grains will increase as the extrusion temperature increases. With the extrusion temperature increasing, the yield strength and tensile strength The strength will be reduced, the elongation will increase; Tensile fracture occurred at room temperature tensile test specimens.
其他文献
文章在简要阐述工程机械设备智能化及智能化管理内涵的基础上,归纳了当前工程机械设备管理存在的问题,最后重点指出了智能化管理对策.
随着时信息化时代的到来,新媒体渗透到多个领域之中,其重要性日益凸显.在影视传媒中,要充分发挥出新媒体技术的优势,确保我国影视传媒业实现自我突破与创新.本文主要对影视传
在现代社会中,汽车成为了生产生活的重要交通工具,为行业发展、居民出行提供着充分便利.为确保汽车为人们提供安全、合理的服务,与之相关的汽车维修等行业获得了充分发展.在
AIM:To investigate the mucosal morphology in Barrett’s oesophagus by chromo and magnifying endoscopy.METHODS:A prospective pilot study at a tertiary medical ce
采用不同的工艺参数对Q235-Cr钢建筑脚手架扣件进行了锻造,并对试样进行了耐腐蚀性能和冲击性能的测试与分析。结果表明:在试验条件下,随始锻温度从1200℃升高至1300℃,终锻
A clear understanding of pedestrian crossing behavior under mixed traffic conditions is needed for providing necessary infrastructure and also for enhancing ped