论文部分内容阅读
塑料浮漂吸水少、浮力大、自重轻、物美价廉,深受钓友们欢迎。然而由于制造者的原因往往有密封不好的现象,从而影响垂钓效果。密封不好多出现在浮漂两端的封口处,购买时虽然仔细挑选也很难发现这样的毛病。笔者有一法,可检验浮漂的密封性。 试验的方法很简单:取一个透明玻璃杯,杯内倒入热水,水的温度约90℃,手持浮漂的一端将浮漂插入杯内的热水中。由于浮漂体内的空气受热后膨胀,如果浮漂密封不良就会有连续气泡不断从密封不良处冒出。就像修理自行车的师傅将车胎充气后浸入水盆中检查车胎是否漏气一样,只是这里的气泡没有车胎漏气时那样多。试验完一端后再试浮漂的另一端。试验过程中如果没有连续气泡冒出则表不这只浮漂密封良好。 将浮漂的密封不良处用电烙铁烫软后用手捏合即可修好。
Plastic float less water, buoyancy, light weight, inexpensive, popular with fishing friends. However, due to the manufacturer’s reasons there is often a bad seal phenomenon, thus affecting the fishing effect. Seal is not good at the seals at both ends of the float, although carefully selected when buying it is difficult to find such a problem. I have a method that can check the sealing of the float. The test method is very simple: take a transparent glass, pour hot water in the cup, the water temperature is about 90 ℃, the end of the hand-held float will float into the cup of hot water. As the float body of the air after the expansion of the heat, if the poor floating seal there will be continuous bubbles continue to emerge from the poor seal. Just as a bicycle repair instructor inflates a tire into a washbasin to check if the tire leaks just as much as the air bubbles do not leak in the tire. After the end of the test re-test the other end of the float. During the test, if there is no continuous bubbling, it means that the float seal is good. The poor seal will be floated with iron after the hot hand kneading can be repaired.