论文部分内容阅读
(三)整车动力总成拆解与合装1.QR019CHA动力总成拆解(1)将车辆放在举升机上升起,放净变速器油,拧下螺栓(Q1861050)并拆下防尘挡板(A21-1501301),如图1217所示。(2)拆开动力总成与前舱线束插接件,拆下传动轴、悬置螺栓等整车附件后,从整车上将动力总成拆下。(3)拧下启动机与变速器连接螺栓,拆下启动机。(4)依次将挠性板总成与液力变矩器的连接螺栓(A21-1501203)转到U形槽中间位置,锁住曲轴螺栓,拆下挠性板总成与变矩器连接螺栓(液力变矩器螺栓A21-1501203)4个,
(C) Disassembly and Assembly of Vehicle Powertrain 1.QR019CHA Disassembly of Powertrain (1) Put the vehicle on the lift, lift the transmission oil, unscrew the bolts (Q1861050) and remove the dust Baffle (A21-1501301), as shown in Figure 1217. (2) Disconnect the powertrain and front cabin harness connector, remove the drive shaft, suspension bolts and other vehicle accessories and remove the powertrain from the vehicle. (3) Unscrew the starter and transmission connecting bolts, remove the starter. (4) Turn the connecting bolt (A21-1501203) of the flexible plate assembly and the torque converter to the middle of the U-shaped groove in turn, lock the crankshaft bolts, and remove the flexible plate assembly and the torque converter connecting bolts (Torque converter bolt A21-1501203) 4,