论文部分内容阅读
一、总说 (一)200B10/8 压气机:为两段固定,往复,立式之空气压缩机,用以坚缩空气供给工业之需。 (二)有关压气机及压气机与电动机之装配,可参考No.3001C图。 (三)压气机与电动机之按装,可参考No.3002C图。 (四)压气机之主要构造为高低压气缸,及其中单动式的活塞。第一段之气缸,(低压气缸,直径大者)先将空气压缩至2.4气压,(每大气压=1033.6g/cm~2本说明书中均以大气压为压力单位,可以每大气压=1kg/cm~2而视之——注)则吐入中间冷却器中;再经第二段之气缸(高压气缸,直径小者。)的吸入及压缩的过程,吐至贮气筒内,压力可达8气压。 (五)有关本机之资料分述于下: 1、压气机长、宽、高(电动机不计,高由地面算起)
First, the total said (A) 200B10 / 8 Compressor: two fixed, reciprocating, vertical air compressor, to deflate the air supply industry needs. (B) For the assembly of compressor and compressor with motor, please refer to No.3001C. (C) compressor and motor by the equipment, refer to No.3002C map. (D) The main structure of the compressor for high and low pressure cylinder, and which single-action piston. The first paragraph of the cylinder, (low pressure cylinder, the larger diameter) first compressed air to 2.4 barometric pressure, (each atmospheric pressure = 1033.6g / cm ~ 2 in this manual are atmospheric pressure unit can be per atmospheric pressure = 1kg / cm ~ 2 and depending on the - Note) is spit into the intercooler; and then by the second paragraph of the cylinder (high pressure cylinder, the smaller diameter.) The process of inhalation and compression spit into the storage cylinder pressure up to 8 bar . (E) The information on the machine is divided into the following: 1, compressor length, width and height (excluding motor, high ground from the ground)