【摘 要】
：
The soil plug phenomenon involving the rising of the surface soil inside the bucket chamber under the suction pressure and seepage forces was simulated and calc
【机 构】
：
School of Civil Engineering
论文部分内容阅读
The soil plug phenomenon involving the rising of the surface soil inside the bucket chamber under the suction pressure and seepage forces was simulated and calculated by deformable discrete element method (DDEM) models. The seepage forces, the effective gravity of soil, the friction on the chamber wall and the suction inside the chamber are considered as the main external forces of DDEM specimen. Three typical types of soil (silty clay, silt and sand) in the Bohai Sea are set as the main environmental conditions in the formation process of soil plug. It is found that the heights of soil plug simulated by DDEM models are 161.85 mm in silty clay, 125.22 mm in silt and 167.56 mm in sand, which are close to model test results and higher than those estimated by discrete element method (DEM). DDEM is an effective method to estimate and predict the heights of soil plug before suction penetration of bucket foundations on site.
其他文献
Metapopulations are ecological models describing the interactions and the behavior of populations living in fragmented habitats. In this paper, metapopulations
The purpose of this paper is to construct quotient algebras L(A)C1/I(A) of complex degenerate composition Lie algebras L(A)C1 by some ideals, where L(A)C1 is de
With the increasing application of electric and electronic devices in space and nuclear power stations, the polymeric insulation materials are inevitably expose
In the present paper, we propose an approach of combination prediction of chaotic time series. The method is based on the adding-weight one-rank local-region me
This paper is concerned with the new method for solving the coefficient inverse problem in the reproducing kernel space. It is different from the previous studi
The pH-sensitive copolymer hydrogels were prepared with the monomers of acrylic acid and N-vinyl-2-pyrrolidone based on gamma radiation technique. The morpholog
Over the past decades SINOPEC has been uninterruptedly engaging in the development and upgrading of deep catalytic cracking(DCC)technology for manufacturing pro
The stability of riverbanks subject to seepage is studied experimentally and theoretically in this paper. By including seepage in a 3-dimensional theoretical an
In order to solve the problem that sweat flows back into the internal layer from the external layer in doublelayer knits, a fabric structure model is set up and
In this paper, a novel approach is presented to synthesize microwave medium of negative refractive index by incorporating metallic wire array with negative effe