Single Crystal Castability and Undercoolability of PWA1483 Superalloy

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:joinnow06
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Both of the single crystal (SX) castability and undercoolability of PWA 1383 superalloy were investigated during the directional solidification and isothermal cooling.In all the six SX parts of a casting cluster,no stray grains were found,revealing a defect-free SX structure.This excellent SX castability of the superalloy was attributed to its good undercoolability.The melting point (TL) and the critical nucleation temperature (TN) of the alloy were measured to be 1327 ℃ and 1306 ℃,respectively.The statistic average of the critical nucleation undercooling ATN =TL-TN of the alloy was determined to be about 21 K,exhibiting a relatively great capacity to be deeply cooled to a temperature below the melting point without the onset of solidification.
其他文献
The as-cast microstructure,element segregation and solidification behavior of a multi-alloyed superalloy ЭК151 have been investigated.The results show that the severe element segregation leads to the complicated precipitations at the inter-dendritic regio
The pure Zn foils with different thicknesses (0.02,0.05,0.1,0.2 and 0.3 mm) were selected as interlayers to improve the quality of friction stir lap welding joint of 7075-T6 Al and AZ31B Mg dissimilar alloys.The effects of the interlayer thickness on join
Fabrication of ternary Nb-17Si-23Ti alloys was attempted by in situ reaction laser melting deposition (LMD) with dual powder feeding method from Nb-28 at.% Ti powder mixture and pure Si powder.The microstructures of the asdeposited alloys were examined wi
Carbon nanotube (CNT)-reinforced 6061Al (CNT/6061Al) composites were fabricated via powder metallurgy combined with friction stir processing (FSP).CNTs were dispersed after FSP and accelerated the precipitation process of the CNT/6061Al composites.However
Glass fibres/epoxy resins composites have been performed as ideal materials to make support instruments for high-energy and nuclear physics experiments.The effects of the γ-ray irradiation on the fatigue strength,thermal conductivities and thermal stabili
Boron-doped aluminum nitride (B-A1N) thin films were synthesized on A1 substrates by using chemical vapor deposition method by changing the synthesis parameters and were used as thermal interface material for high power light emitting diode (LED).The B-A1
Solidification shrinkage has been recognized as an important factor for macrosegregation formation.An arbitrary Lagrangian-Eulerian (ALE) model is constructed to predict the macrosegregation caused by thermal-solutal convection and solidification shrinkag
Mixtures of W and B13C2 powders were mechanically milled and subsequently annealed at 900-1200℃.It is found that amorphous W-B-C alloy formed as the mixtures were milled for 20-80 h.After annealing the 80 h-milled mixtures at 900-950 ℃,solid solutions of
Target assembly is a key consumable material for producing thin film used in the electronic packaging and devices.The residual stresses induced during the process of soldering are detrimental to the performance of target assembly.In this work,the intensit
Mg-Zn-Ag alloys have been extensively studied in recent years for potential biodegradable implants due to their unique mechanical properties, biodegradability and biocompatibility. In the present study, Mg-3Zn-xAg (wt%, x = 0. 2, 0. 5 and 0. 8) alloys wit