论文部分内容阅读
为减少和防止由于锻锤砧座倾斜而造成的锤杆断裂事故,确保锻造加工技术要求,田心机车车辆工厂对新安装的两台半吨蒸汽锤的基础采取了一些改进措施。如将砧座下的垫木每隔0.5～1米用螺栓拧紧,以保证垫木的平整度与整体性;垫木与基础凹坑四周留出10～15毫米的空隙并用
In order to reduce and prevent the hammer rod rupture caused by the tilting of anvil forging hammer and ensure the technical requirements of forging processing, Tianxin Locomotive and Rolling Stock Factory adopted some improvement measures on the basis of newly installed two and a half tons of steam hammers. Such as the anvil under the wood every 0.5 to 1 meter bolted to ensure the flatness and integrity of the mat; dunks and basins around the pit leaving 10 to 15 mm and use