论文部分内容阅读
中原油田文东地区属于典型的盐间高压油气藏，油气层埋藏深，上部大直径井眼井段长。因而，如何提高大井眼钻井速度，是文东高压油气井钻井的重要课题。经过大量的实践，提出了解决这一问题的途径。从优选喷嘴组合，喷嘴类型和水力参数，增大双喷嘴直径差，配备大功率泥浆泵，降低钻井液水眼粘度等几个方面入手，以多种途径提高泵压和钻头水马力，从而提高了水力破岩能力。同时，优选钻头类型，总结出适合文东高压油气区快速钻进的三套钻头系列，从而充分发挥了钻头的工作效率，并使用合适的钻具组合及钻井参数，在满足井身质量的前提下，大幅度地提高了钻井速度，有效地降低了钻井成本。
The Wendong area of Zhongyuan Oilfield is a typical high-pressure salt-to-gas reservoir with deep oil and gas reservoirs and long wellbores with large diameter holes in the upper part. Therefore, how to improve the drilling speed of big wellbore is an important subject of drilling in Wendong high-pressure oil and gas well. After a great deal of practice, some solutions to this problem have been put forward. From the aspects of optimizing nozzle combination, nozzle type and hydraulic parameters, increasing the diameter difference of dual nozzles, providing high-power mud pump and reducing the water-eye viscosity of drilling fluid, etc., pump pressure and bit power are increased in many ways to improve The hydraulic rock breaking capacity. At the same time, the type of drill bit is optimized, and three sets of drill bit series suitable for rapid drilling in Wendong high-pressure oil and gas region are concluded, so that the working efficiency of drill bit is fully exerted, and the proper drilling assembly and drilling parameters are used to meet the requirements of wellbore quality Under, greatly increased the drilling speed, effectively reducing drilling costs.