意大利欧洲制冷公司装配式冷库构造介绍——摘译自意大利欧洲制冷公司《装配式冷库指南》一文

• 作 者: 张彦芬
• 出 处: 冷藏技术
• 发表日期: 1990年03期
• 关键词: 装配式冷库 压型钢板 标准板 聚氨酯树脂 夹芯板 予制 镀锌钢板 连接件 隔汽层 燕尾槽

意大利欧洲制冷公司予制体系是利用夹芯板做墙和天花板。在0.5～1mm厚的压型镀锌钢板之间夹有发泡聚氨酯树脂,压力发泡的板芯发泡均匀完好,而且完全粘附在板面上。意大利欧洲制冷公司标准板是用两种基本类型1050×1300mm的特制压型钢板组合而成的。用四种这种型材板组合,便能根据用途加工而成不同类型的板,主要有两种:墙板和天花板。如图1所示。

The system of prefabrication by the Italian refrigeration company in Europe is the use of sandwich panels for walls and ceilings. Foam-type polyurethane resin is sandwiched between 0.5-1 mm thick galvanized steel sheets, and the foamed core foam is uniformly and perfectly foamed, and is completely adhered to the board surface. Italy, the European refrigeration company standard plate is a combination of two basic types 1050 × 1300mm special profiled steel plate. With the combination of four such profiles, there are two main types of panels that can be processed to suit the application: wall panels and ceilings. As shown in Figure 1.